FujiFilm FINEPIX Z1000EXR Owner's Manual page 131

Problem Problem
The camera does not re- The camera does not re-
spond to the touch panel, spond to the touch panel,
or does not perform the or does not perform the
expected action when expected action when
the touch panel is used. the touch panel is used.
Time and date stamps Time and date stamps
FinePixViewer can not FinePixViewer can not
be installed or does not be installed or does not
start. start.
Troubleshooting
• • The touch panel requires calibration The touch panel requires calibration: Calibrate the touch panel (
• • The hand that is holding the camera is touching the panel The hand that is holding the camera is touching the panel: Adjust your grip so that the
hand that is holding the camera is not touching the panel. hand that is holding the camera is not touching the panel.
• • Time and date stamps are not correct Time and date stamps are not correct: Set the camera clock (
• • Time and date stamps appear on photographs Time and date stamps appear on photographs: Time and date stamps can not be deleted. To
prevent stamps appearing on new photographs, select OFF prevent stamps appearing on new photographs, select
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied
with Mac OS X or purchase other software. with Mac OS X or purchase other software.
Problems and Solutions
Solution Solution
: Calibrate the touch panel (P
: Adjust your grip so that the
P 21).
: Set the camera clock (P
: Time and date stamps can not be deleted. To
OFF for for U U DATE STAMP
P 105).
105).
21).
P 105).
DATE STAMP ( (P 105).
117