FujiFilm FINEPIX Z1000EXR Owner's Manual page 127

Problem Problem
Some fl ash modes are Some fl ash modes are
not available. not available.
The fl ash does not fully The fl ash does not fully
light the subject. light the subject.
Pictures are blurred. Pictures are blurred.
Pictures are mottled. Pictures are mottled.
Pictures are not recorded. Pictures are not recorded.
Sounds made by the Sounds made by the
camera are recorded with camera are recorded with
movies. movies.
Troubleshooting
• • The desired fl ash mode is not available in the current shooting mode The desired fl ash mode is not available in the current shooting mode: Choose a diff erent
P 29).
shooting mode ( shooting mode (P 29).
• • The camera is in silent mode The camera is in silent mode: Turn silent mode off (
• • The subject is not in range of the fl ash The subject is not in range of the fl ash: Position the subject in range of the fl ash (
• • The fl ash window is obstructed The fl ash window is obstructed: Hold the camera correctly (
• • The lens is dirty The lens is dirty: Clean the lens ( : Clean the lens (P
• • The lens is blocked The lens is blocked: Keep objects away from the lens ( : Keep objects away from the lens (P
• • s s is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red: Check focus
P 118).
before shooting ( before shooting (P 118).
• • k k is displayed during shooting
is displayed during shooting: Use the fl ash or a tripod (
• • A slow shutter speed is selected at high temperatures A slow shutter speed is selected at high temperatures: This is normal and does not indi-
cated a malfunction. cated a malfunction.
• • The camera has been used continuously at high temperatures or a temperature warn- The camera has been used continuously at high temperatures or a temperature warn-
ing is displayed ing is displayed: Turn the camera off and wait for it to cool down. : Turn the camera off and wait for it to cool down.
Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler, Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler,
turn the camera off . Leaving the camera on can result in corrupted fi les or damage to the memory turn the camera off . Leaving the camera on can result in corrupted fi les or damage to the memory
card or internal memory. card or internal memory.
• • u u CONTINUOUS
CONTINUOUS is selected for
( ( P P 90).
90).
• • Zoom was adjusted during shooting Zoom was adjusted during shooting: Do not adjust zoom during shooting.
• • Intelligent Face Detection is on Intelligent Face Detection is on: Turn Intelligent Face Detection off (
Solution Solution
: Turn silent mode off (P
: Position the subject in range of the fl ash (P
: Hold the camera correctly (P
P 109). 109).
: Use the fl ash or a tripod (P
is selected for F F MOVIE AF MODE
MOVIE AF MODE: Select a diff erent AF mode
: Do not adjust zoom during shooting.
: Turn Intelligent Face Detection off (P
Problems and Solutions
: Choose a diff erent
P 99). 99).
P 25).
25).
P 25).
25).
P 42).
42).
: This is normal and does not indi-
: Select a diff erent AF mode
P 46).
46).
P 129).
129).
: Check focus
113