Bframe No; I Volume; Sound - FujiFilm FINEPIX Z1000EXR Owner's Manual

Table of Contents

The Setup Menu

B FRAME NO.

FRAME NO.

New pictures are stored in image fi les named using a four-digit

fi le number assigned by adding one to the last fi le number used.

The fi le number is displayed during playback as shown at right.

B FRAME NO. controls whether fi le numbering is reset to 0001

when a new memory card is inserted or the current memory card

or internal memory is formatted.

Option

CONTINUOUS

RENEW

R If the frame number reaches 999-9999, the shutter release will be disabled (P 120).

R Selecting

RESET (P 99) sets

number.

R Frame numbers for pictures taken with other cameras may diff er.

I VOLUME

VOLUME

Adjust volume for the shutter, controls, and playback. Tap an option and choose a volume,

either by selecting an option in a menu (shutter and control volume) or by tapping

choose a setting between OFF and 10 (playback volume). Tap OK when settings are complete.

b SOUND

SOUND

Choose the sounds used for the shutter, at startup, and for camera controls. Tap an option and

then tap an icon to choose a sound. Tap OK when settings are complete.

100

Numbering continues from the last fi le number used or the fi rst available

fi le number, whichever is higher. Choose this option to reduce the num-

ber of pictures with duplicate fi le names.

Numbering is reset to 0001 after formatting or when a new memory card

is inserted.

FRAME NO. to CONTINUOUS but does not reset the fi le

Troubleshooting