Jog Embroidering; Hoop Feed Position - Brother BES-1241BC Instruction Manual

4. Jog Embroidering

BES-941BC

5. Hoop Feed Position

• In order to ease mounting and dismounting of the embroidery hoop, another needle position
can be set as a hoop feed position in the movable area additionally to the current needle
position.
• In order to ease material attachment while operation is suspended, the hoop can be moved
to the feed position at any time by the hoop feed switch.
• The hoop can also be moved to the feed position automatically after embroidering is finished.
Refer to "Hoop Automatic Retract" on Page 106 for details.
BES-1241BC
BES-941BC • BES-1241BC
• Jog embroidering can be used for
preventing the thread from slipping from
the needle at the start of embroidering.
• Jog embroidering can be executed as long
as the start switch at the machine head is
held down.
Note) Never apply a tape on the switch to keep jog
operation for a long time. Doing so may cause
damage to the machine.
Chapter 6 Operation of Machine
129