Connection - Panasonic WV-SW458 Installation Manual

Connection

Caution:
• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE.
Turn off a circuit breaker before making a connection. Before starting the connection, prepare the
required devices and cables.
Note:
• When using the mount bracket (accessory), it is possible to connect the cables after mounting
the camera onto the mount bracket.
• Refer to page 20 when connecting the conduit.
<WV-SW458>
* E model only
<WV-SW458M>
SW458
Network cable
RJ-45 connector (female)
Alarm input/output cable 4P alarm cable (accessory)
Power cable
(12 V DC)
Microphone/line input cable (white)
Audio output cable (black)
Network cable
M12 connector (male)
Alarm input/output cable
Power cable
(12 V DC)
Microphone/line input cable (white)
Audio output cable (black)
LAN cable (category 5 or better)
2P power cable (accessory)
Red
Black
LAN cable (category 5 or better)
4P alarm cable (accessory)
2P power cable (accessory)
Red
Black
12 V DC (red)
GND (black)
Power cable
12 V DC
Positive
Negative
12 V DC (red)
GND (black)
Power cable
12 V DC
Positive
Negative
25