Wall Mounting - VTech Cordless Telephone Manual

Hide thumbs Also See for Cordless Telephone:

Table of Contents

Installation

Wall Mounting

You can obtain a wall mounting accessory by calling 1-800-595-9511. In Canada,

call 1-800-267-7377

The Wall Mount bracket is designed for use on standard Wall Mount plates only.

1. Line up the tabs on the wall mount bracket with the slots on the bottom of the

Base Unit. Snap the bracket firmly in place.

2. Plug the AC adapter into an electrical outlet, and the DC connector to the

Base. If the battery pack has not been previously charged, place the Hand-

set in the cradle, and allow it to charge for 12 hours.

3. Connect the telephone line cord to the jack on the Base, and the other end

to the wall jack.

4. Mount the Base on the wall. Position the Base Unit so the mounting studs

will fit into the holes on the wall mount bracket. Slide the Base Unit down on

the mounting studs until it locks into place.

Align holes on bracket with

mounting studs on wall plate.

Slide bracket down on studs

until it locks into place.

Table of Contents