Vauxhall Combo Owner's Manual page 161

156 Self-help
7. Screw in wheel bolts and tighten
slightly, inserting the wheel bolt
wrench 3 as fa r as possible.
On some versions, the wheel trim m ust
be positioned before the wheel bolts
are tig htened.
8. Lower vehic le.
9. Tighten wheel bolts crossw ise, putting
on wheel bolt w rench 3 as far a s
possib le.
Alloy wheels 3 : put hub cap on a nd
engage, inserting pin on rear of hub
ca p into relevant hole in wheel.
Alloy wheels with anti-theft lock 3: Put
hub ca p on. Insert and tighten anti-
theft lock 3.
10. Before refitting the w heel trim, clean the
wheel around the retaining clips. Valv e
sym bol 3 on back of wheel trim must
point towards va lv e on wheel.
Align and engage hub cap or wheel
trim 3 and wheel b olt caps 3.
11. Stow the replac ed w heel, tools and
warning triangle - see p ages 148, 151.
12. Check the tyre pressure of the newly
fitted w heel. Adjust as nec essary .
13. Have the tightening torque of the wheel
bolts on the new wheel checked on the
vehicle using a torque wrench as soon
as possib le and , if necessary, corrected.
Tightening torque – see page 205.
14. Replace the faulty tyre on the wheel
that was rem oved.
15. Replace the tem pora ry spare wheel 3
with a full specification wheel without
delay.