Total Module; Pedal Module - Zoom GFX-707 Operation Manual

Guitar effects processor
Table of Contents

Advertisement

JAM (Jam Play)
This is a special effect that lets you record a guitar phrase during
play and reproduce it in various ways.
Parameter 1
STYLE
Selects playback method for recorded phrase.
nM (Normal): Play in normal direction.
rS (Reverse): Play in reverse direction.
SC (Scratch): Use expression pedal to play with scratch type
effect. From center position, pedal controls either forward or
reverse playback.
Parameter 2
TRG/GT
Selects playback method for
tS (Trigger One-Shot): Pressing
run from start. Pressing
foot switch during play stops play.

TOTAL module

TOTAL is not an independent effect module. Rather it serves to set parameters that affect all patches or the entire GFX-707. You can
switch between the TOTAL 1 and TOTAL 2 pages with the TYPE (BANK)
TOTAL 1
Parameter 1
Specifies input position
Parameter 2
Selects characters
Parameter knobs 1 and 2 let you input or edit a patch name. Knob
1 specifies the character input position (indicated by the flashing
part of the display), and knob 2 selects the alphanumeric
character to be input at that position.
(Space)
(Space)
'
(
)
*
+
5
6
7
8
9
<
D
E
F
G
H
I
Q
R
S
T
U
V
Parameter 3
PATLVL
Sets final patch level. Level adjustment is performed with
parameter knob 3. A value of 25 corresponds to unity gain.

PEDAL module

Strictly speaking, the PEDAL module is not an effect module. It contains various settings for the expression pedal.
Parameter 1
ASSIGN
Selects module to be assigned to expression pedal.
oF: Off
VL: Volume
dS: COMP•DIST module
Md: MOD module
rv: REV module
Parameter 2
MODE
Determines how parameter changes when pedal is moved.
UP: Parameter minimum value
dn: Parameter maximum value
Hi: Current value
maximum value (forward direction)
Lo: Minimum value
current value (forward direction)
20
nM, rS, SC
foot switch.
foot switch causes one play
-
/
0
1
2
3
4
=
>
?
@
A
B
C
J
K
L
M
N
O
P
W
X
Y
Z
\
1 – 30
oF, VL, dS, Md, rV
UP, dn, Hi, Lo
maximum value
(forward direction)
minimum value
(reverse direction)
tL (Trigger Loop): Pressing
Pressing
foot switch during play stops play.
GS (Gate One-Shot): While
run from start is performed. Releasing
GL (Gate Loop): While
foot switch is pressed, loop play from
start is performed. Releasing
rS (Retrigger One-Shot): Pressing
run from start. Pressing
foot switch during play causes restart
from beginning.
Parameter 3
MIX
Adjusts effect mix.
NOTE
For a detailed explanation of Jam Play, see page 21.
/
keys.
TOTAL 2
Parameter 1
DIRLOD
Switches Direct Load function on and off. When "on", the sound
changes immediately when the patch is switched (default). When
"oF", reading in the new patch is delayed until confirmed by the
user.
This parameter applies to all patches. It is stored automatically
when the parameter setting is changed.
Parameter 2
BNKHLD
Switches Bank Hold function on and off. When "oF", repeatedly
pressing the
foot switch cycles through all patches and banks,
such as A1
A2
A3
A4
bank is fixed and patches are switched only within the bank, such
as A1
A2
A3
A4
A5
This parameter applies to all patches. It is reset to "oF" at power-
on.
Parameter 3
AMPMOD
Adapts characteristics of built-in amp simulator to usage
environment of unit. When GFX-707 is connected to guitar
amplifier, use "AP". For connection to line-level equipment such
as mixer or recorder, use "Ln".
This parameter applies to all patches. It is reset to "AP" at power-
on.
Parameter 3
MINVOL
Sets minimum value when using expression pedal as volume
pedal (ASSIGN parameter set to "VL").
When using the expression pedal as a volume pedal, the
NOTE
volume changes from the MINVOL value to the maximum
value in the forward direction, regardless of the MODE
parameter setting.
Parameters 1 and 2 can be set for each patch and are stored
NOTE
when the patch is stored. Parameter 3 applies to all patches
and is automatically stored when the setting is changed.
For information on adjusting parameters with the expression
HINT
HINT
pedal, see page 22.
foot switch causes loop play.
foot switch is pressed, one play
foot switch stops play.
foot switch stops play.
foot switch causes one play
0 – 30
on, oF
on, oF
A5
B1. When "on", the
A1.
AP, Ln
0 – 10
ZOOM GFX-707

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents