Mod (Modulation) Module - Zoom GFX-707 Operation Manual

MOD ( modulation) module
This module comprises spatial effects such as chorus and flanger, filter effects such as auto wah, and modulation effects such as ring
modulator.
CHORUS
TYPE 1
This stereo chorus effect produces a clear and very wide sound
stage.
Parameter 1 DEPTH
Adjusts effect depth.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 MIX
Adjusts effect mix ratio.
V-CHO (Vintage Chorus)
TYPE 2
This chorus effect is characterized by warm and smooth sound.
Parameter 1 DEPTH
Adjusts effect depth.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 MIX
Adjusts effect mix ratio.
FLANGE (Flanger)
TYPE 3
This effect produces a unique, undulating sound.
Parameter 1 DEPTH
Adjusts effect depth.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 FB
Adjusts feedback level. Increasing this value in the plus or minus
direction emphasizes the distinctiveness of sound, but with
different tonal character.
PHASE
TYPE 4
This effect results in a swooshing sound.
Parameter 1 POSI
Selects connection order of COMP•DIST module and MOD
module, as follows.
AF: COMP•DIST MOD
MOD COMP•DIST
bF:
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 COLOR
Selects phase sound type.
TREMOL (Tremolo)
TYPE 5
This effect periodically varies the level of the sound.
Parameter 1 TOPDEPTH
Adjusts effect depth.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 CLIP
Adjusts modulation waveform clip. Larger values result in more
intense modulation.
A-PAN (Auto Pan)
TYPE 6
This stereo panning effect periodically moves the sound back and
forth between the right and left channel.
Parameter 1 WIDTH
Adjusts effect width.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 CLIP
Adjusts modulation waveform clip.
A-WAH (Auto Wah)
TYPE 7
This effect gives a varying wah sound that depends on the
picking intensity.
Parameter 1 POSI
Selects connection order of COMP•DIST module MOD module,
as follows.
AF: COMP•DIST MOD
18
0 – 10
1 – 30
0 – 30
0 – 10
1 – 30
0 – 30
0 – 10
1 – 30
-10 – 10
AF, bF
1 – 30
1 – 4
0 – 10
1 – 30
0 – 10
0 – 10
1 – 30
0 – 10
AF, bF
MOD COMP•DIST
bF:
Parameter 2 RESO
Adjusts wah effect intensity.
Parameter 3 SENS
Adjusts sensitivity. Negative values result in downward wah.
P-WAH (Pedal Wah)
TYPE 8
This effect lets you control wah with the expression pedal.
Parameter 1 POSI
Selects connection order of COMP•DIST module and MOD
module.
Parameter 2 FREQ
Adjusts wah effect center frequency.
Parameter 3 DIRMIX
Adjusts original sound mix.
For the MODE parameter of the PEDAL module (
NOTE
"Hi" and "Lo" is equivalent to "dn".
STEP
TYPE 9
This is a special effect with step-like filter characteristics.
Parameter 1 DEPTH
Adjusts depth.
Parameter 2 RATE
Adjusts modulation speed.
Parameter 3 RESO
Adjusts effect intensity.
PITCH (Pitch Shifter)
TYPE 10
This is a pitch shifter with a range of 1 octave up and 2 octaves
down.
Parameter 1 PITCH
Sets the pitch shift amount. The "dt" setting results in a detune
effect.
Parameter 2 TONE
Adjusts effect tone.
Parameter 3 BAL
Adjusts balance between effect sound and direct sound. Higher
values emphasize effect sound.
P-PIT (Pedal Pitch)
TYPE 11
This effect lets you vary the pitch in real time, using the
expression pedal.
Parameter 1 TYPE
Selects the pedal pitch type. Depending on the type, the pitch
when pushing the pedal down or when raising it differs.
Pedal
minimum value
P-PIT
1
-100 cent
TYPE
2
Original sound only
3
DOUBLING
4
Detune + DRY
5
0 cent
6
+1 octave
7
0 cent
8
-2 octaves
9
-1 octave + DRY
10
+1 octave + DRY
11
-700 cent + DRY
12
500 cent + DRY
13
- (0 Hz) + DRY
14
+1 octave
15
- (0 Hz) + DRY
16
+1 octave + DRY
Parameter 2 TONE
Adjusts effect tone.
1 – 10
-10 – -1, 1 – 10
AF, bF
1 – 10
0 – 10
p. 20),
0 – 10
1 – 30
0 – 10
-12, ...- 1, dt, 1,... 12, 24
0 – 10
0 – 30
1 – 16
Pedal
maximum value
Original sound only
-100 cent
Detune + DRY
DOUBLING
+1 octave
0 cent
-2 octaves
0 cent
+1 octave + DRY
-1 octave + DRY
500 cent + DRY
-700 cent + DRY
+1 octave
- (0 Hz) + DRY
+1 octave + DRY
- (0 Hz) + DRY
0 – 10
ZOOM GFX-707