Chapter 3: Internet Access; Prepare Your Network Information - NetComm NB3300 Quick Start Manual

Chapter 3: Internet Access

This chapter describes the procedures necessary to configure the basic functions and to start up
your NetComm ADSL Modem Router. On successful completion of these procedures, you will
be able to access the Internet via your NetComm ADSL Modem Router.

3-1 Prepare your network information

When setting up your NetComm ADSL Modem Router, in order to allow a quick reference
point, it is suggested you complete the table below with the necessary information which should
be supplied by your ISP:
Provided by some ISPs (
Host Name:
Domain Name:
WAN/Public IP address given by ISP:
Dynamic
Static
IP Address:
Subnet Mask:
Default Gateway:
DNS Server Primary:
DNS Server Secondary:
DNS Server Third:
VPI and VCI values:
VPI:
VCI:
Working mode:
Gateway using LLC Encap with Dynamic IP.
Gateway using LLC Encap with Static IP.
Gateway using Classical IP
Gateway using PPPoE
Gateway using PPPoA
Router using Classical IP
Modem using LLC Encaps.
PPP authentication:
Login Name:
Password:
www.netcomm.com.au
Page 18
tick indicates common minimal requirements)
______________________________________
______________________________________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
______________________________________
______________________________________
______________________________________
______________________________________
Rev.1 - YML632
ADSL Modem Router