2-2 Front Panel LEDs
The following figure shows the front view of the NetComm ADSL Modem Router.
The LEDs on the front panel indicate the status of the unit.
Power:
Green
Diag:
Red
ADSL port
Link:
Green
Activity:
Yellow
LAN ports
Link/ACT:
Yellow
Green
Yellow/ Green Blinking when data is being received/transmitted through the
FD/COL:
Green
Rev.1 - YML632
ADSL Modem Router
On when power is on.
Lights up during system check when the power is initially
connected. If the Router is working properly, the light should
switch off after the diagnostic has been completed.
Blinking when ADSL line is training.
On when ADSL line is ready.
Blinking when data is being received/transmitted through ADSL
line.
On when link is up and operating at 10Mbps.
On when link is up and operating at 100Mbps.
LAN port.
On when operating at full duplex mode (10/100M).
Blinking when a collision is occurring on the port.
www.netcomm.com.au
Page 11