System Requirements And Setup - NetComm NB3300 Quick Start Manual

Adsl modem router

Hide thumbs Also See for NB3300:

Table of Contents

2-3 System Requirements and Setup

To connect to the Internet, an ADSL enabled phone line and an Internet access account from an

ISP are required. In order to operate with the ADSL Modem Router, each computer that is to be

connected to the ADSL Modem Router should have the following items installed:

1. Ethernet NIC (Network Interface Card: a 10Base-T or 10/100Base-T/TX Ethernet card).

2. Standard twisted-pair Ethernet cable (UTP network cable) with RJ-45 connectors.

3. System OS: Windows 95, Windows 98, Windows NT4.0, Windows 2000, Windows Me,

Windows XP, or Macintosh

4. TCP/IP network protocol.

5. Web browser, such as Microsoft Internet Explorer or Netscape Navigator.

Installing the TCP/IP Protocol in Windows

If you are not sure whether the TCP/IP Protocol has been installed, follow these steps to check,

and if necessary, install TCP/IP onto your computer.

1. Click the "Start" button. Choose "Settings", then "Control Panel".

Double-click the "Network" icon. Your Network window should appear.

Select the "Configuration" tab.

Note: For Windows 2000 & Windows XP the settings can be reached by

Rev.1 - YML632

ADSL Modem Router

www.netcomm.com.au

Page 13

Table of Contents