Note: When assembling the heat plate, make sure that these three hocks on the heat plate are properly
inserted into the openings located on the top cover.
Removing the Memory Module
To remove the memory module, first remove the Keyboard cover (see
cover), remove the keyboard (see
heat
plate) then perform the following steps:
1. Unclip memory module as shown in Fig. 13
2. Remove the Memory Module from its slot and put it aside.
Removing the Wireless Module
To remove the Wireless Module, first remove the keyboard cover (see
cover), remove the keyboard (see
Fig. 12 Removing Heat plate from base unit
Removing the
Fig. 13 Removing the memory module
Removing the
Packard Bell EasyNote T5 Disassembly Manual
Removing the keyboard
keyboard), remove heat plate (see
Removing the keyboard
keyboard), remove the heat plate (see
Removing
Page 10