Ricoh Aficio SP 1200SF Quick Setup Manual page 31

Installing the Driver & Software
6
Choose Standard and then click Next. The
installation will continue.
7
When this screen appears, connect the USB
interface cable to your PC, and then connect it
to the machine.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub. We
recommends that you connect the machine
directly to your computer.
8
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation of the drivers will automatically
start. The installation screens appear one
after another, please wait for a while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
9
Click Finish to restart your computer. (After
restarting the computer, you must be logged on
with Administrator rights.)
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Installation
Diagnostics shows a failure, please follow the
on-screen instruction.
The Multi-Function Suite (including
printer driver and scanner driver) has
been installed and the installation is now
complete.
29