Creating Your Original Organ Flutes Voices - Yamaha Tyros4 Owner's Manual

Creating Your Original Organ Flutes Voices

The Tyros4 uses advanced digital technology to recreate the legendary sound of vintage organs. Just as on a traditional
organ, you can create your own sound by increasing and decreasing the levels of the flute footages.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2
Use the [ASSIGN] slider and [1]–[8] sliders to adjust the footage
settings.
The footage settings determine the basic sound of the organ flutes. The term "foot-
age" is a reference to the sound generation of traditional pipe organs, in which the
sound is produced by pipes of different lengths (in feet).
If you want, you can select the Organ type, change the Rotary Speaker speed and
adjust the Vibrato setting, by using the [A]–[C] and [F]–[H] buttons.
[A]/[B] ORGAN TYPE
[C] ROTARY SP
SPEED
[F] VIBRATO OFF
[G] VIBRATO ON
[H] VIBRATO DEPTH
[I] PRESETS
3
Press the [I] (PRESETS) button to return to the Organ Flutes
Voice Selection display.
NEXT PAGE
44
Tyros4 Owner's Manual
About the VOLUME/ATTACK Page and EFFECT/EQ
Page, see the Reference Manual on the website.
Specifies the type of organ tone generation to be simulated: Sine, Vintage or Euro.
Alternately switches between the slow and fast rotary speaker speeds when a rotary
speaker effect is selected for the Organ Flutes (DSP TYPE parameter in the EFFECT/
EQ Page), and the VOICE EFFECT [DSP] button is turned on.
Alternately turns the vibrato effect for the Organ Flutes Voice ON or OFF.
Sets the Vibrato depth to one of three levels: 1 (low), 2 (mid), or 3 (high).
Opens the File Selection display of the Organ Flutes Voices for selecting a preset
Organ Flutes Voice.
NOTE
You can also use the [1 ]–[8
] buttons to adjust the footages 5
1/3'–1'.
NOTE
When this display is shown, the func-
tion assigned to the ASSIGN controller
does not work. The ASSIGN slider
works only to adjust the 16' footage.
2