Creating Your Original Organ Flutes Voices - Yamaha CLAVINOVA CVP-501 Owner's Manual

Creating Your Original Organ Flutes Voices

The instrument uses advanced digital technology to recreate the legendary sound of
vintage organs. Just as on a traditional organ, you can create your own sound by
increasing and decreasing the levels of the flute footages.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2
2
Use the [1 ▲▼] – [8 ▲▼] buttons to adjust the footage settings.
The footage settings determine the basic sound of the organ flutes.
The [1 ▲▼] buttons control two footages: 16' and 5 1/3'. Pressing the [D]
button switches between these two footages.
1
2
If you want, you can select the Organ type, change the Rotary Speaker speed
and adjust the Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
1
[A]/[B]
2
[C]
3
[F]
[G]
4
[H]
5
[I]
46
CVP-509/505/503/501 Owner's Manual
ORGAN TYPE Specifies the type of organ tone generation to be
simulated: Sine or Vintage.
ROTARY SP Alternately switches between the slow and fast
SPEED rotary speaker speeds when a rotary speaker effect
is selected for the Organ Flutes (DSP TYPE
parameter in the EFFECT/EQ Page), and the DSP
is turned on (page 44).
VIBRATO OFF Alternately turns the vibrato effect for the Organ
Flutes Voice ON or OFF.
VIBRATO ON
VIBRATO Sets the Vibrato depth to one of three levels:
DEPTH 1 (low), 2 (mid), or 3 (high).
PRESETS Opens the File Selection display of the Organ
Flute Voices for selecting a preset Organ Flutes
Voice.
NOTE
The term "footage" is a reference to
the sound generation of traditional
pipe organs, in which the sound is
produced by pipes of different lengths
(in feet).
3
4
5
NOTE
About the VOLUME/ATTACK Page
and EFFECT/EQ Page, see the Refer-
ence Manual on the website.