Audio Data Playback - Yamaha Tyros4 Owner's Manual

Audio Data Playback

Refer to page 75 for the file formats that can be played back on the Tyros4.
1
Press the AUDIO RECORDER/PLAYER [SELECT] button several
times to call up the desired Audio File selection display (AUDIO
(MULTI), AUDIO (SIMPLE) or PLAYLIST).
The Simple and Multi Track files can be added to the Playlist, and from within the
Playlist mode, the Simple and Multi Track files can be freely played back. For
information on the Playlist display, refer to the Reference Manual on the website.
2
Use the TAB [][] buttons to select the location (HD or USB),
then use the [A]–[J] buttons to select the desired audio file.
You can also select an audio file by using the [DATA ENTRY] dial, then press the
[ENTER] button to execute.
Confirming the Audio Information
By pressing the [7 ] (INFO) button here, you can check the information (file
name, path, sample rate etc.) of the selected red-framed file. To close the
Information display, press the [F] (OK) button.
3
Press the AUDIO RECORDER/PLAYER [PLAY/PAUSE] button to
start playback.
To stop playback, press the [STOP] button.
For details on organizing your files in folders, renaming files, deleting unnecessary
files, etc., see page 28.
Selecting the Previous/Next Audio Song
Press the AUDIO RECORDER/PLAYER [PREV]/[NEXT] button. This only selects the
previous/next song in the same folder level.
Keep in mind that these buttons cannot be used when the AUDIO SETTING display is
shown.
Adjusting the Playback Volume
1
Press the [BALANCE] button once or twice to call up the BAL-
ANCE (2/2) display.
NEXT PAGE
80
Tyros4 Owner's Manual
NOTE
• If you want to play back the audio data
of a USB flash memory, connect the
USB flash memory containing the
data to the [USB TO DEVICE] termi-
nal.
• The instrument cannot play back DRM
protected files.