Sending Files To A Shared Network Folder - Ricoh Aficio MP C3500 Operating Instructions Manual

Sending Scan Files to Folders

Sending Files to a Shared Network Folder

This section explains how to specify the destination when sending files to a
shared network folder.
Important
❒ The shared folder must have been created on the client computer in advance.
2
❒ Depending on the operating system of the client computer, access to the shared
folder may require authentication.
You can send a file to a shared folder over the network by any of the following
methods:
• Enter the path to the destination directly
• Specify the path by browsing the network for the destination
Entering the path to the destination manually
You can enter the path to the destination folder manually.
A
Press [Manual Entry].
B
Press [SMB].
C
Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
D
Enter the path for the folder.
The following is an example of a path where the folder name is "user" and the
computer name is "desk01": \\desk01\user.
Instead of specifying the destination using its path, you can also use its IPv4
address.
E
Press [OK].
50