Enterasys SecureStack A2 A2H254-16 Hardware Installation Manual page 66

Using LANVIEW
Table 4-1 LANVIEW LEDs (continued)
LED
DOWN
UP
Manager
4-4 Troubleshooting
Color State
Off No valid connection to switch
stackup connector.
Green Solid. Valid connection to
switch stackup connector.
Flashing. Information is being
transferred via the stacking
cable.
Off No valid connection to switch
stackdown connector.
Green Solid. Valid connection to
switch stackdown connector.
Flashing. Information is being
transferred via the stacking
cable.
Off Switch is operating as a
Member in the stack.
Green Solid. Switch is operating as
the Manager of the stack.
Recommended Action
1. Make sure the switch connected to the
stackup connector is powered on.
2. Replace cable with a known good one.
3. If the problem still exists, contact
Enterasys Networks for technical
support.
None.
1. Make sure the switch connected to the
stackdown connector is powered on.
2. Replace cable with a known good one.
3. If the problem still exists, contact
Enterasys Networks for technical
support.
None.
None.
None.