ELECTRICAL HAZARD: Only qualified personnel should install the 2H258-17R.
NOTE: Read the Release Notes shipped with the device to check for any exceptions to
the supported features and operation documented in this guide.
This chapter provides the instructions required to install the 2H258-17R. A Phillips screwdriver is
required to install options into the device or install the device into a rack. Follow the order of the
sections listed below to correctly install the device.
•
Unpacking the Device
•
Installing Options
•
Installing the Device (on a shelf or tabletop, or into a standard rack)
•
Connecting to the Network
•
Completing the Installation
(Section
3.1)
(Section
3.2)
(Section
3.4)
(Section
3.5)
Installation
(Section
3.3)
Installation
3
3-1