Operation; Product View And Parts Identification - Craftsman 536.885910 Owner's Manual

• ii1•11 i i • i
........ , . ............... , OPERATION
THROWER .......
KNOWYOUR:SNOW
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW
TH ROWER.
Compare the illustrations with your snow thrower to familiarize yourselfwith the location of vadous
controls and adjustments. 'Save this manual for future r_emn_
AUGER DRIVE TRACTION DRIVE
.... i LEVER LEVER
LEVER
...... . CHUTE DEFLECTOR :
DISCHARGE
CHUTE
WBGHT
TRANSFER
IGNITION
KEY
PRIMER BUTTON
BUTTON
REOOIIL
STARTER
HANDLE
CHOKE CONTROL
SCRAPER BAR
THROTTLE CONTROL
FIG. 8
I IIJIItUI I • I I 111111111 I
SEARS TRAC-PLUS SNOWTHROWERS conform to the safety standardsof the American National Standards
Institute.
L _ .......
ii LIL
AUGER DRIVE LEVER - Starts and stopsthe auger and
impeller(snow gathering and throwing).
TRACTION DRIVE LEVER - Propels the snow thrower
forward and in reverse.
SPEED SHIFTER LEVER - Selects the speed of the
snowthrower (6 speeds forward and 2 speeds reverse).
HEADLIGHT - Turns on wheneverthe engine is running.
CRANK ASSEMBLY - Changes the direction of snow
throwingthrough the discharge chute.
CHUTE DEFLECTOR - Changes the distancethe snow
is thrown. :
• DISCHARGE CHUTE :Changes the direction the snow
is thrown.
" WEIGHTTRANSFER PEDAL- Engage for heavy snow
i i iron f i
conditions, to keep the snow throwerfrom climbing drifts
and hard-packed snow. When released, it eases trans-
port of the snow thrower.
HEIGHT ADJUST SKIDS - Adjuststhe ground clear-
ance of the auger housing.
IGNITION KEY- Must be insertedto start the engine.
ELECTRIC STARTER BUTTON - Used to start;the
engine using the 120 V electricstarter.
RECOIL STARTER HANDLE - Starts the engine manu-
ally. *
CHOKE CONTROL - Used to start a cold engine.
PRIMER BUTTON - Injectsfuel directlyintothe carbu-
retor manifoldfor fast starts in cold weather.
THRO'I-rLE CONTROL - Controls the engine speed,
10