Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
1 Remove the three screws on the back of the
stand that secure the back cover, then remove
the cover
and the
2 Attach the wall-mount bracket with M6 screws
(not included).
stand.
15.74" (400 mm)
www.insigniaproducts.com
TV/Blu-ray combo
components
Accessories
• Remote control
• Batteries AA (2)
• AC power cord
• Cleaning cloth
• Component cable
• Stand screws (4)
• Stand
• User Guide
• Quick Setup Guide
Left side
# Item
Description
1
EJECT
Press to eject the disc from the disc slot.
In TV or Blu-ray mode, press to increase (+) or
decrease (–) the volume.
2
VOLUME +/–
In menu mode, press to navigate the menus and select
settings.
In TV mode, press to tune to the next higher channel in
the channel list. For information about creating the
channel list, see "Automatically scanning for
3
CHANNEL
/ (play)
channels" on page 23.
In Blu-ray mode, press to begin playback.
In menu mode, press to select a menu.
In TV mode, press to tune to the next lower channel in
the channel list. For information about creating the
channel list, see ""Automatically scanning for
4
CHANNEL
/ (stop)
channels" on page 23.
In Blu-ray mode, press to stop playback.
In menu mode, press to select a menu.
5
MENU
Press to open the on-screen menus.
1
2
3
4
5
6
7
8
5