Installing A Wall-Mount Bracket; Tv/Blu-Ray Combo Components; Accessories; Front - Insignia NS-32LB451A11 User Manual

Installing a wall-mount bracket

To attach your TV/Blu-ray combo to a
wall-mount bracket:
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
1 Remove the two screws on the back of the stand
that secure the back cover, then remove the
cover.
2 Remove the eight screws holding the TV/Blu-ray
combo to its stand, then remove the stand.
3 Attach the wall-mount bracket with M4 screws
(not provided).
6
7.87" (200 mm)
www.insigniaproducts.com
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
TV/Blu-ray combo
components

Accessories

• Remote control
• Batteries AA (2)
• Remote control holder
• AC power cord
• Cleaning cloth
• Component cable
• Audio cable
• Stand
• Stand screws and washers (4)
• Stand column screws (8)
• Stand cover screws (2)
• Quick Setup Guide

Front

# Item Description
Lights blue when your TV/Blu-ray combo is turned on.
Lights red when your TV/Blu-ray combo is in standby
mode.
1
Power indicator
Does not light when the power cord is unplugged.
For more information, see "Turning your TV/Blu-ray
combo on or off" on page 23.
Receives signals from the remote control. Do not block.
2
Remote sensor