Adjusting Time Settings; Setting The Sleep Timer; Setting Automatic Shut Off; Adjusting Menu Settings - Insignia NS-LBD32X-10A User Manual

• Background Color—Select Auto, Black,
White, Red, Green, Blue, Yellow, Magenta, or
Cyan.
• Background Opacity—Select Auto, Solid,
Transparent, Translucent, or Flashing.
8 Press TV MENU to return to the previous menu,
or press EXIT to close the menu.
Notes
• You cannot set both the Text Color and
Background Color to the same color.
• You cannot set both Text Opacity and
Background Opacity to Transparent.

Adjusting time settings

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Setting the sleep timer

To set the sleep timer:
• Press SLEEP to turn off your TV/Blu-ray combo
after a specified interval. The interval increases
each time you press SLEEP. You can select Off, 0h
5m, 0h 10m, 0h 15m, 0h 30m, and on up to 4h
0m.
To see how much time is remaining, press SLEEP.
The remaining time is displayed for a few seconds.
To cancel the sleep timer, press SLEEP repeatedly
until Off appears.

Setting automatic shut off

The Auto Shut Off feature automatically turns off
your TV/Blu-ray combo after 15 minutes if the
station being viewed stops broadcasting and you
do not press buttons on your TV/Blu-ray combo or
remote control during that time.
To set automatic shut off:
1 Press TV to select TV mode.
2 Press TV MENU. The Main Menu opens.
34
NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
3 Press
ENTER. The Setup menu opens.
4 Press
5 Press TV MENU to return to the previous menu,
or press EXIT to close the menu.

Adjusting menu settings

Note

Selecting the on-screen menu language

To select the on-screen menu language:
1 Press TV to select TV mode.
2 Press TV MENU. The Main Menu opens.
3 Press
ENTER. The Setup menu opens.
www.insigniaproducts.com
or to select Setup, then press
or to select Auto Shut Off, then press
or to select On or Off.
Unless otherwise noted, all tasks in this section are
based on using the remote control.
or to select Setup, then press
or
or