Canon PowerShot SX10 IS User Manual page 84

1.Use the_'or'_button toselect El.
2.Press the _'_'_ b utton.
* Recording time will be displayed.
* Use the ÷ or @ button to change
the sample rate. Sound quality will
improve in the order of [11.025kHz],
[22.050kHz], [44.100kHz], but the
recorded file size will also increase AvailableRecording
respectively.
* When pressing the FUNCo/SET button, recording will pause.
Pressing the button once again will resume recording.
Pressing the shutter button halfway or pressing the movie
button will stop sound recording and switch the camera to
shooting mode.
° The sound mode can be changed (p. 93).
Control Panel