Canon PowerShot SX10 IS User Manual page 30

361
_Auto Exposure Bracketing (AEB Mode)
In this mode, the camera automatically changes the exposure within a
set range to take three shots at the same interval as continuous
shooting (p. 108). The images are shot in the following order: Standard
exposure, underexposure and overexposure.
SeJect AEB.
!. Press the _ button.
2, Use the ,_ or _, button to select
and use the 4" or ¢, button to
select _.
3. Press the DISP, button.
range.
!. Adjust the compensation range with
the _, or ¢_ button.
2, Press the _ button.
• The compensation range can be set
as wide as 2 levels lower and 2 levels Standard
exposu_e
higher than the standard exposure Compensation range
value (the compensated exposure
value if exposure adjustment was performed) at the center point
in 113 increments. If exposure adjustment (p. 134) is already
done, setting can be done with the adjusted value as the center
point.
To CanceJ the AEB Mode:
Select _ in Step 1.