Canon PowerShot SX10 IS User Manual page 16

1221
Selecting a Subject to Focus On
(Face Select and Track)
_o,,._; o," >> p. 284
Once the focus is fixed to a subject's face, the frame can be set to
follow the subject within a certain range. Set the AF frame mode in the
[_ menu to [Face Detect] in advance (p. 118).
1, Press the _ button while faces are detected by the camera.
° The camera enters face select mode, FaceFrame
and the face frame (: i ) of the main
subject displays in green. Even if the
subject moves, the frame will follow
the subject within a certain range.
, The face frame will not display
when a face is not detected.
2. Select the person you wish to focus on.
, When several faces have been
detected, pressing the @ or ¢_
button or turning the control dial will
move the face frame to another
subject.
• Holding down the DISPo button for Face Frame
more than 1 second will display
face frames (up to 35) of all the
detected faces (green: face of main
subject, white: detected faces).
3. Press the _ button again.
, The camera exits face designation
mode, and the face frame ('LL) of
the main subject will change to white (the frame will continue
to follow the subject within a certain range).
Holding the _ button pressed will release the face detection
mode.