Connection - Panasonic WV-SF438 Installation Manual

Connection

Caution:
• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE.
Before starting the connection, turn off the power of this camera and the devices to be connected.
Check and prepare the required devices and cables for connection.
Note:
• Since the connector storage section does not
have a sufficient space, use a LAN cable that do
not exceed the sizes described in the illustrations.
z
Remove the sub cover.
Insert a thin tool* into the sub cover of the camera as illustrated, then lift up the sub cover to
remove it. Connect the cables to the camera with the sub cover attached to the camera as
shown in the illustrations.
* A slotted head screwdriver etc.
IMPORTANT:
• Do not use excessive force when removing the sub cover. Failure to observe this may dam-
age the sub cover.
Sub cover
Sub cover
9 mm
{11/32 inches}
Example of LAN cable connector
23