Table of Contents
Advertisement
SETTING THE CLOCK
The SET CLOCK pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation. The clock
has been preset at the factory for the 12 hour operation.
When the range is fi rst plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will fl ash.
To set the clock
1. Press SET CLOCK. "CLO" will appear in the display.
2. Press
or
pad to set the correct time of day. Wait
4 seconds to accept the change or press the CANCEL
pad to reject the change. The new time of day will
appear in the display.
CHANGING BETWEEN 12 OR 24 HOUR TIME
OF DAY DISPLAY
1. Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2. CONTINUE holding the pad until "12h" or "24h"
appears in the display and the control beeps once.
3. Press
or
pad to switch between the 12 and 24
hour time of day display. The display will show either
"12h" or "24h".
4. Wait 4 seconds to accept the change or press CANCEL
pad to reject the change.
5. Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.
BEFORE SETTING OVEN CONTROLS
SETTING MINUTE TIMER
The TIMER ON . OFF pad controls the Minute Timer feature.
The Minute Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The Minute Timer feature can be
used during any of the other oven control functions. Refer
to "Minimum and Maximum Control Pad Settings" for time
amount settings.
To set the Minute Timer (example for 5 minutes)
1. Press TIMER ON . OFF. "-- --" will appear in the
display.
2. Press
or
display.
3. Wait 4 seconds and the time will begin to count down
with the set time and "TIMER" will stay in the display.
4. When the set time has run out, "End" will show in
the display. The clock will sound with 3 beeps every
15 seconds until TIMER ON . OFF is pressed.
To cancel the Minute Timer before the set time has
run out
1. Press TIMER ON . OFF. The display will return to the time
of day.
SETTING ADD A MINUTE FEATURE
The ADD A MINUTE pad is used to set the Add 1 Minute
feature. When the ADD A MINUTE pad is pressed, 1
minute is added to the Minute Timer feature if this feature
is already active. If the Minute Timer feature is not active
and the ADD A MINUTE pad is pressed, the Minute Timer
feature will become active and will begin counting down
from 1 minute.
TO OPERATE THE OVEN LIGHT
The interior oven light(s) will automatically turn ON when
the oven door is opened.
Press
to turn the interior light(s) ON and OFF whenever
the door is closed.
pad to set the desired time in the
13
Advertisement
Table of Contents
