Frigidaire FGEF300DNB Important Safety Instructions Manual page 21

Complete owner's guide (english)
Hide thumbs Also See for FGEF300DNB:
Table of Contents

Advertisement

SETTING SELF-CLEAN CYCLE TIME LENGTH
The SELF CLEAN pad controls the Self-Cleaning feature. If
you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about one
hour. So a 3 hour self-clean cycle will actually take about
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for
light soils, a 3 hour cycle for average soils, and a
4 hour cycle for heavy soils (to assure satisfactory
results).
To set the controls for a Self-Cleaning cycle to start
immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. "- -:- -" appears in the display.
3. Press the
or
to select between 2, 3 or 4 hour.
"CLn" appears in the display.
As soon as the controls are set, the motor driven lock will
begin to close automatically and the "DOOR" and "LOCKED"
indicator light will appear. DO NOT open the oven door
while the light is fl ashing (it takes about 15 seconds for the
oven door to lock).
When the Self-Clean Cycle is Completed
1. "Hot" will appear in the display window and the "DOOR"
and "LOCKED" light will continue to glow.
2. Once the oven has cooled down for approximately 1
HOUR, and the "DOOR" is no longer displayed, the oven
door can then be opened.
NOTE
When the oven is cool, wipe away any residue or powdered
ash with a damp cloth or paper towel.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fi re in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven
has cooled down for approximately 1 HOUR, and the
"DOOR" is no longer displayed, the oven door can then
be opened.
CAUTION
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the
oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible
burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
The SELF CLEAN and DELAY START pads controls the
Delayed Self-Clean operation. The automatic timer will turn
the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. "- -:- -" appears in the display.
3. Press the
or
to select between 2, 3 or 4 hour. "CLn"
appears in the display.
As soon as the controls are set, the motor driven lock will
begin to close automatically and the "DOOR" and "LOCKED"
indicator light will appear. DO NOT open the oven door
while the light is fl ashing (it takes about 15 seconds for the
oven door to lock).
4. Press DELAY START.
5. Enter the desired start time using the number pads
or
pads.
6. Wait 4 seconds for the controls to accept the set time.
7. The control will start the self-cleaning at the set start
time, for the period of time previously selected.
When the Self-Clean Cycle is Completed
1. "Hot" will appear in the display. The time of day, the
"DOOR" and "LOCKED" will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the "DOOR" and "LOCKED" are no longer
displayed, the oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fi re in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the "DOOR"
and "LOCKED" are no longer displayed.
SELF-CLEANING
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fgef300dnfFgef300dnwFgef301dnbFgef301dnfFgef301dnw

Table of Contents