Overview; Serial Interface Specification; Transfer Specification; Connection - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Basic Serial Command Functional Specifications

1. Overview

0û
These specifications define projector control commands for PLC-WTC500L.
0û The projector control commands are used to control a projector through RS-232C from a computer.

2. Serial Interface Specification

2.1. Transfer Specification

Item
Synchronous system
Transmission Speed
Data Length
Parity
Stop Bit
Flow Control
$ `
Transmission speed: initial setting value is 19200.
$ a Transmission speed can be changed in service mode.

2.2. Connection

Dedicated serial cable must be used for the connection between computer and projector.
Asynchronous
9600 / 19200
8 bits
None
1
None
PC
COM 1
ÿ D-Sub 9 Pinÿ
4/25
S p e c i f i c a t i o n
Projector
Control Port
ÿ D-Sub 9 Pinÿ