Sanyo PLC-WTC500AL - 5000 Lumens Manual page 23

PLC-WTC500L Basic Serial Command Functional Specifications
0û
"2C" [CR]
Status: Cooling Down in process due to Shutter management function
This indicates it has moved to Cooling down status according to the setting of Shutter
Management function in setting menu. During this time, Functional Execution Commands are
not accepted.
0û "8C" [CR]
Status: Standby after Cooling Down due to Shutter management function.
This value is returned when Cooling Down operation due to Shutter management has been
completed and the status has been moved to Standby. The status is kept until the next
operation starts. When projector is turned on again, it cancels the last status and starts normal
operation.
23/25