On Start Set Command; On Start Cancel Command; Power Management Ready Command; Power Management Cancel Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Basic Serial Command Functional Specifications

6.29 ON START SET Command

Command "C28" [CR]
Enable Power ON Start
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.30 ON START CANCEL Command

Command "C29" [CR]
Disable Power ON Start
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.31 POWER MANAGEMENT READY Command

Command "C2A" [CR]
Set Power Management function to ready status
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.32 POWER MANAGEMENT CANCEL Command

Command "C2B" [CR]
Set Power Management function to off status
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.33 POWER MANAGEMENT SHUTDOWN Command

Command "C2E" [CR]
Set Power Management function to Shutdown mode.
Detail This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable
Response
Unacceptable

6.34 D.ZOOM + Command

Command "C30" [CR]
Enter Digital Zoom mode and expand image size
Detail
This command works the same way as "D.ZOOM " button of the remote control.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
14/25