Paper Size; Supported Paper Sizes; Table 3-1 Supported Paper And Print Media Sizes - HP LaserJet Enterprise 500 Reference

The name that appears in the Name text box depends on the following conditions:
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
●
tab, then the Name text box shows the name of the selected custom paper size.
If a standard paper size has been selected on the Paper/Quality tab, then the Name text box
●
shows the default name of Custom .
If a new name has been typed into the Name text box for the purpose of saving a new size or
●
renaming an existing size, then that new name will remain in the text box until the new size is
saved or the dialog box is closed.
If you type a new name into the Name text box, but then do not click Save, you can change the
width and height values without losing the name. However, if you close the dialog box without clicking
Save, any unsaved name or size values are lost without warning.

Paper size

The width and height values can be changed by typing numeric strings into the edit boxes in the
Paper Size group box.
Any entry that is greater than the maximum limits of the width and height control is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
control is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are
validated when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current
measurement units.

Supported paper sizes

This product supports a number of paper sizes, and it adapts to various media.
NOTE:
To obtain best results, select the correct paper size and type in the print driver before printing.
Table 3-1 Supported paper and print media sizes
Size and dimensions
Letter
215.9 x 279 mm (8.5 x 11 in)
Legal
215.9 x 355.6 mm (8.5 x 14 in)
A4
210 x 297 mm (8.27 x 11.69 in)
ENWW
Tray 1 Tray 2 Tray 3 (optional)
Paper/Quality tab features
65