Table 3-5 Driver Mopier Mode And Collation Settings - HP LaserJet Enterprise 500 Reference

the driver, and can be disabled by changing the Mopier Mode setting on the Device Settings tab
to Disabled.
Control collation through the print driver by selecting or clearing the Collated check box on the
Advanced tab. Click Copy Count under the Paper Output setting. You can clear the check box,
which is available only when the Copy Count option is set to more than 1 copy, to allow the software
program to control collation.
To receive uncollated multiple copies of a print job, you must clear the Collated check box and make
sure that the software program collation feature is not selected.
The following table shows the relation between mopier mode settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column, "Expected
result", shows how a 3-page print job would appear.
Table 3-5
Mopier mode
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
114 Chapter 3 HP PCL 6 print driver for Windows
Driver mopier mode and collation settings
Application collation
Not selected
Not selected
Selected
Selected
Not selected
Not selected
Selected
Selected
Driver collation
Not selected
Selected
Not selected
Selected
Not selected
Selected
Not selected
Selected
Expected result
3 copies uncollated
3 copies uncollated
3 copies collated
3 copies collated
3 copies uncollated
3 copies uncollated
3 copies collated
3 copies collated
ENWW