Figure 2-7 Software Installation - Enable Hp Web Services Screen - HP LaserJet Enterprise 500 Reference

7. Click the Next button to proceed to the Enable HP Web Services screen.
Figure 2-7
Select the option to Yes, open my Web browser to enable HP Web services for
▲
my printer. to go to an HP web site and set up the Web services HP ePrint for your
product.
When Web Services are enabled, ePrint information appears in the HP Embedded Web
Server. Look for the e-mail address that is automatically assigned to the product. The product
also prints an HP Web Services page that contains this e-mail address and instructions for
using the service.
-or-
Select the check box next to No, do not enable Web services if you do not want
HP Web services enabled for your product. Click the Exit button.
Configure HP ePrint
a. Go to www.hpeprintcenter.com.
b. Click Sign In to enter your HP ePrintCenter credentials or to sign up for a new account.
c. Select your product from the list, or click + Add printer to add it. To add the product, you
need the printer code, which is the segment of the product e-mail address that is before the @
symbol.
NOTE:
HP Web Services again, and obtain a new code.
ENWW
Software installation — Enable HP Web Services screen
This code is valid for only 24 hours. If it expires, follow the instructions to enable
Detailed Microsoft Windows installation instructions
37