13.
When the installation is complete, the Summary dialog appears, stating that the installation was
successful.
Figure 4-10
Click the Close button to exit the installer.
Setup instructions
This section contains information about the following topics:
Setting up a printer with Mac OS X v10.5, v.10.6
●
Troubleshooting the product setup
●
Setting up a printer with Mac OS X v10.5, v.10.6
Complete these steps after completing the printing-system software installation if you did not add a
printer when running the installer.
1.
If you are installing the product using a USB connection, connect the USB cable between the
product and the computer if you have already not done so. Turn on the product. If you are
installing using a network connection, verify that the network cable is connected to the product
and that the product is on.
2.
Max OS X 10.5 and 10.6: From the Apple menu
click the Print & Fax icon.
130
Chapter 4 Mac OS X software and utilities
Mac installer Summary dialog
, click the System Preferences menu, then
ENWW