System/Factory Reset; System Reset - Yamaha PSR-S950 Reference Manual

SYSTEM RESET

In this display, you can execute one of two reset methods: Factory Reset and Custom Reset. Factory Reset
lets you call up the default initial settings for each item while Custom Reset lets you call up your original
settings with a single touch.
Factory Reset
(see below)
Factory Reset—Restoring the Factory Programmed Settings
This function lets you restore the status of the instrument to the original factory settings.
1
Use the [1 ]–[3 ] buttons to select the desired item then press the [4 ]
buttons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
SYSTEM SETUP
MIDI SETUP
USER EFFECT
MUSIC FINDER
FILES & FOLDERS
REGIST
2
Press the [D] (FACTORY RESET EXECUTE) button to execute the Factory Reset
operation for all checkmarked items.
Resets the System Setup parameters to the original factory settings. Refer to
the Data List (Parameter Chart) for details about which parameters belong to
System Setup.
Resets the MIDI settings including the MIDI Setups on the USER tab display
to the original factory status.
Resets the current Effect settings and the following data:
• User Effect Types ........................................................................
• User Master EQ Types .............................................................
• User Vocal Harmony Types (PSR-S950 only) ............................
• User Microphone Setting Memories (PSR-S950 only)...............
Resets the Music Finder data (all Records) to the original factory settings.
Deletes all files and folders including the Expansion folder stored in the USER
tab display.
Turns off all the Registration Memory [1]–[8] lamps, indicating that no Regis-
tration Memory Bank is selected although all the Registration Memory Bank
files are maintained. In this status, you can create Registration Memory setups
from the current panel settings.
The same operation can be done by turning the power on while holding the B5 key (rightmost B key). In this
NOTE
case, you can create Registration Memory setups from the default panel settings.
Custom Reset
(see page
page 97
page 100
page 87
page 82
PSR-S950/S750 Reference Manual
116)
11
115