5.6 Print Position versus Cutter Position (TM-88II/TM88III)
The following illustration shows the relationship between print position and cutter position.
Manual cutter position
Autocutter blade position
Cut position
Print direction
Note:
The values in the figure are center values. The margins vary, due to paper slack or paper variations from
piece to piece. Allow a certain margin of error when setting the paper cutter cut position.
Rev. A
Maximum printable area
Figure 5-2 Print position versus cutter position
TM-T88II/T88III Technical Reference Guide
Final line of previous
receipt
Approx. 29 mm
Approx. 15 mm
Product Specifications 5-5