Ethernet Interface Connection - Epson T88IIIP - TM B/W Thermal Line Printer Technical Reference Manual

To use USB model TM printers, the TM printer driver (EPSON OPOS ADK or advanced printer
driver) must be installed on the host computer. Get the latest driver information from one of the
following URLs:
For customers from North America, go to the following web site: http://pos.epson.com/
For customers from other countries, go to the following web site:
http://www.epson-pos.com/
Select the product name from the "Select any product" pull-down menu.
For details on EPSON OPOS ADK or advanced printer driver, refer to "Introducing the Control
Methods" (page 3-1).

2.4.4 Ethernet Interface Connection

Connect a TM printer with an Ethernet interface to a network by an Ethernet cable via a hub.
2.4.4.1 Ethernet Interface Connection Diagram
Example:
Note:
When a TM printer is connected to the host computer via a network interface, a customer display (DM-D)
cannot be connected to the TM printer. If a customer display must be connected, connect it to the host
computer's serial interface.
Rev. A
Figure 2-13 Ethernet connection
TM-T88II/T88III Technical Reference Guide
Setup 2-13