Appendix D Tm-T88Ii/Tm-88Iii Comparison Table - Epson T88IIIP - TM B/W Thermal Line Printer Technical Reference Manual

Appendix D
TM-T88II/TM-88III Comparison Table
1. High-speed print mode
2. High-speed power
consumption mode
3. Serial interface selectable
baud rates
4. Conditions for canceling
receive buffer BUSY state *
5. Supported character sets
(extended graphics) *
6. Driver (EPSON OPOS ADK,
Advanced Printer Driver )
* For details on the conditions for canceling the receive buffer BUSY state, refer to ' DIP Switch Functions, ' (page 2-3).
Rev. A
TM-T88III
Approx. 150 mm/s {5.91"/s}
(4.72") maximum
Average approx. 1.8 A
4800, 9600, 19200, 38400, (2400
discontinued; 38400 added). 38400
selected by setting DIP SW1-7 and 1-8
to ON.
Set on DIP SW2-5 *
11 pages
including WPC 1252,
PC866 [Cyrillic #2], PC852 [Latin2])
Also can be operated by the TM-T88II
driver. Functions, however, are
restricted as follows:
• Some baud rates cannot be used in
serial communications (38400 bps,
2400 bps).
Note: The driver cannot set a
38400 bps baud rate. Selecting
a 2400 bps baud rate with the
driver causes garbled
characters (the printer does not
support a 2400 bps baud rate).
TM-T88II/T88III Technical Reference Guide
TM-T88II
Approx. 120 mm/s {4.72"/s}
(4.72") maximum
Average approx. 1.7 A
2400, 4800, 9600, 19200
Cannot be changed
8 pages
—
TM-T88II/TM-88III Comparison Table D-1