Table of Contents
Advertisement
3.1.3 Width and Height Properties
The width and height properties are explained in the following.
RecLineSpacing
JrnLineSpacing
SlpLineSpacing
SlpLineHeight [dot]
RecLineHeight [dot]
JrnLineHeight [dot]
SlpLineWidth [dot]
RecLineWidth [dot]
(When 79.5 mm is set)
RecLineWidth [dot]
(When 59.5 mm is set)
RecLineWidth [dot]
(When 57.5 mm is set)
JrnLineWidth [dot]
RecSidewaysMaxLines
RecSidewaysMaxChars
(When Font A is selected)
RecSidewaysMaxChars
(When Font B is selected)
RecLinesToPaperCut
SlpSidewaysMaxLines
SlpSidewaysMaxChars
SlpMaxLines
X: No settings
*1
In the case of a line thermal station, the Line Spacing setting is identical with the height
of the characters which means that it can be set at up to 17 when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the character height.
*3
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
The value differs accordance with the selected paper width.
*4
It can be changed by the settings of the font width, or the selected paper type.
Property
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61 Feb. 2008
Settings
Default
Maximum
Value
value [dot]
30
127
X
X
X
X
X
24,17
X
X
512
384
360
X
*3
17
*4
138
*4
184
*2
5
X
X
X
Minimum
value [dot]
*1
24
X
X
Advertisement
Table of Contents
