Recording Your Performance; Track Structure Of A Song; Quick Recording - Yamaha PSR-I455 Owner's Manual

Owner's manual
Hide thumbs Also See for PSR-I455:
Table of Contents

Advertisement

Recording Your Performance

You can record up to 10 of your performances as User Songs. The recorded User
Songs can be played back on the instrument.
NOTE
• The Tabla/Tanpura performance cannot be recorded.

Track Structure of a Song

 Melody Tracks [1]–[5]
The melody performance in the right-hand area of
the keyboard will be recorded.
 Accompaniment Track [A]
The chord progression (for the Style) will be
recorded.
Track
Track
1
2

Quick Recording

The operation is useful when you record a new Song
from scratch.
1
Make the desired settings including the
Main Voice selection.
2
Make the desired settings of your perfor-
mance.
• If you want to record only the melody performance, press
the [SONG] button.
• If you want to record the performance using a Style, press
the [Style] button.
3
Press the [REC] button to enter the
Record Ready mode.
If a User Song was not selected beforehand, this
operation selects the lowest-numbered unrecorded
User Song (from 101–110) as Recording target.
To exit from this status, press the [REC] button
again.
NOTE
• The ACMP on/off status cannot be changed after the
[REC] button is pressed.
28
PSR-I455 Owner's Manual
Track
Track
Track
Accompaniment
3
4
5
Track
User 1
rEC
001
Flashes
Flashes
4
Start recording.
• When you press the [SONG] button in Step 2, play any note
to start recording.
• When you select a Style in Step 2, play a chord in the Auto
Accompaniment area to start recording with Style play-
back, or press the [START/STOP] button to start recording
only with playback of the Rhythm part of a Style.
User 1
rEC
The current measure will be shown on the display
while recording.
5
Press the [START/STOP] or [REC] button
to stop recording.
When using a Style, you can stop recording also
by pressing the [ENDING] button then waiting
until playback ends.
After recording finishes, "Writing!" appears indi-
cating that the recorded data will be stored, then
the recorded track numbers in the display will
light.
NOTICE
• Never attempt to turn the power off when "Writing!" is
shown in the display. Doing so can damage the flash
memory and result in a loss of data.
6
To play back the recorded Song, press
the [START/STOP] button.
003
Current measure number
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents