GE JGBP86 Owner's Manual & Installation Instructions page 16

Usingthe clock and timer.
Not all features are on all models.
To Set the Clock
OR
HOLD3 SEC.TO
SET CLOCK
Make sure the clock is set to tiTe
correct time of day.
Tile clock must be set to the correct time of
day for the automatic oven timing flmctions
to work properly. Tile time of day cannot
be changed during a timed baldng or self-
cleaning cycle.
[] On models with a
C/'OCK pad,
touch it once to set. On models with
a TIMER/C/'OCKpad, touch and hokl
tile pad tmti] tile display changes.
[] Touch tile number pads.
Touch tile number pads tile same wa x you
read them. Fo_ example, to set 12:34, touch
tile mm/ber pads I, 2, 3 and 4in that order.
If number pads are not touched within one
minute after you touch tile CLOCK pad, tile
dispk U reve_s to tile original setting. If this
happens, touch tile CLOCK pad and reenter
tile time of day.
[] Touch
tile START pad
tmtil tile time of
da_ shows in tile display. This entel_
tile time and starts tile clock.
Tocheckthet/kne of flaywhenthed/2pley /2
showleg other bformation:
On models with a
C/,OCK pad,sknply
touch the
C/,OCK pad.
On models with a TIMER/C/,OCK pad, touch and
hoU theTIMER/C/.OCK p aduntil thetleTe of day
&played.
ThetleTe of day#owe untilanother p ad/_ touched
HOLD 3 SEC,TO
SETCLOCK
+
Q( G)G)CD
QQGQG
@
Ttie timer is a minute timer only.
Ttie CtEAR/OFFpad does not affect
the timer.
To Set the Timer
ThetlYnerdoesnot control oven operations.
Themaxl_numsetting on the timer is 9 hours
and 59 minutes.
[]
[]
Touch tile KITCHENTIMERON/OFF
or TIMER/CLOCK (depending
on
Inodel) pad.
Touch tile imlnber pads until tile
alllOt/nt of tilne VOt/want shows in
tile
display. The maxinmn/tilne that can
be entered in inilmtes is 59. Tilnes
more than 59 Inilmtes should be
changed to houi5 and Ininutes. For
exalnple, to enter 90 inilmtes as ]
hour 30 inilmtes, touch
I, 3andO
in
that ordeI:
If youmakea mistake, p resstheKITCHENTIMER
ON/OFF or TIMER/CLOCK ( depending o nmodel)
padandbeginagakT.
[]
Touch tile
STARTpad.
_dtei" pressing
tile STARTpad, SET disappeaxs;
this
tells _ou tile dine is coui_fing down,
although tile display does not change
tmtil one inilmte has passed.
[]
XAq/en tile flirter reaches :00, tile
COlm ol will beep 3 filnes followed
by one
beep eveI T 6 seconds tmtil
tile KITCHENTIMERON/OFF or
TIMER/CLOCK
(depelMing on
Inodel) pad is touched.
The6 second tonecanbecanceled by followleg
thestepsin theSpecial f eatures of youroven
controlsectionunderTones at theEndof
a Timed Cycle.
16