Assembly screw (4)
(silver)
●
XYN5+F18FN
M5 × 18
■
Assembling the pedestal
Use the assembly screws
the base
securely.
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will strip
the threads.
●
"L" or "R" mark is stamped on the bottom of the pole.
A
C -
C -
R
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Assembly screw (4)
(black)
●
THE3DL001N
M5 × 30
to fasten the poles
A
L
D
from the TV.
from the poles.
Pole (2)
●
R: TBL5ZA3311
●
L: TBL5ZA3310
L
■
Securing the TV
to
Use the assembly screws
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Arrow mark
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
Base
●
TBL5ZX0343
(TX-P42X50B)
●
TBL5ZX0341
(TX-P50X50B)
R
to fasten securely.
B