Panasonic Viera TX-P42X50B Operating Instructions Manual page 32

Menu Item
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
Timer Programming
TV Guide View
Off Timer
Eco Navigation
VIERA Link
AV1 out
Standby Power
Save
Intelligent Auto
Standby
Q-Link Download
Child Lock
32
Adjustments / Configurations (alternatives)
Narration settings for visually impaired users [Off] / [Auto]
Set to [Auto] to activate the narration sound track when available on the
broadcast.
● The availability of audio description sound track is indicated by [AD] in the
information banner (p. 16).
●
For DVB mode
Adjusts the volume for Audio Description
●
For DVB mode
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
●
For DVB mode
Set to [On] to activate the description sound track from headphones [Off] / [On]
●
For DVB mode
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets a timer to record or remind forthcoming programmes (p. 42)
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal]: Default TV Guide screen
[Full]: Displays channels and programmes full-screen without the operation guide
[Info]: Displays details of the selected programme at the bottom without the
operation guide
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 17)
Automatically sets the TV to the most suitable energy-saving mode
● If you press the OK button, the following items are set as below:
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Sets to use VIERA Link functions [Off] / [On] (p. 62)
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
● Component and HDMI signals cannot be output.
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 63)
●
This function is available when [VIERA Link] is set to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 63)
●
This function is available when [VIERA Link] is set to [On].
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Applies access control for channels or inputs to prevent unwanted access (p. 44)
[On (No reminder)]
[On]