Panasonic Viera TX-P42X50B Operating Instructions Manual page 34

Menu Item
Connection Test,
IP/DNS Settings
Software Update
MAC Address
DivX® VOD
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
Power on
Preference
Power on Channel
List
Auto Standby
Power Save
∗ The settings in [Tuning Menu] are applicable only for the selected TV mode. The menu name varies depending on the
TV mode. ([DVB Tuning Menu] / [Analogue Tuning Menu])
●
A different menu will be displayed in the mode of Media Player. (p. 51 - 58)
● Only available items can be selected.
34
Adjustments / Configurations (alternatives)
Sets the network setting to use in your network environment (p. 45)
Checks for available software updates from the Panasonic website
Displays the MAC address of this TV
Displays DivX VOD registration code (p. 71)
Resets all settings to the original condition (p. 47)
Inputs the owner ID (p. 48)
Sets for watching encrypted channels, etc. (p. 49)
Downloads new software to this TV (p. 50)
Displays the software licence information
Displays the system information of this TV
Automatically selects the input when the TV is turned on [TV] / [AV]
● Set to [TV] to view picture from TV tuner. Set to [AV] to view input from the
external equipment connected to the AV1 or HDMI1 terminal, e.g. satellite
receiver.
●
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Automatically selects All Channels or Favourites list in the Information banner
when the TV is turned on [All Channel List] / [Last]
●
Set to [All Channel List] to display all the channels. Set to [Last] to display the
one you selected last time.
● Not valid on Analogue mode
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
●
Starting Timer Programming automatically does not affect this function.
●
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
● The notification message will appear 3 minutes before going into Standby mode.
Reduces brightness of the picture to economise on power consumption
[Off] / [On]