Setup for Internet Connection
The ETHERNET terminal is for TV's software update. You can download a newer version of software through the
internet, if it is available.
●
To update the TV's software without internet connection
Network connections
Connect the TV and the Broadband network equipment (modem, hub or router) by using a LAN cable.
Note
●
If you do not have any broadband network services, please consult your retailer for assistance.
●
Ensure to use a LAN straight cable for this connection.
●
Set up and connect any equipment required for the network environment. You cannot make settings for the
equipment on this TV. Read the manual of the equipment.
●
Contact your Internet Service Provider (ISP) or telecommunications company for further assistance regarding the
network equipment.
●
Confirm the terms and conditions of the contracts with your Internet Service Provider (ISP) or telecommunications
company. Depending on the contracts, additional fees may be charged or multiple connections to the internet may be
impossible.
[Network Setup]
Ensure the connections are completed before starting Network Setup.
Display the menu and select [Setup]
1
Select [Network Setup]
2
Setup Menu
Network Setup
Note
[MAC Address]
●
MAC address is a unique address that identifies hardware in the network. (for information only)
Network Setup
Connection Test
IP/DNS Settings
Software Update
MAC Address
ab-cd-ef-gh-ij-kl
(p. 46)
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs (in two places)
Main Menu
Picture
Sound
Setup
Access
"Updating the TV Software" (p. 50)
LAN cable (Unshielded)
●
Use the Unshielded Twist Pair (UTP) LAN cable.
∗ Less than 10 cm
Wind the cable twice
select
access
select
access
Internet environment
Close
45