Installing And Connecting Awx Switch; Unpacking A Wx Switch - 3Com WX2200 - Wireless LAN Controller Hardware Installation Manual

2
Unpacking a WX
Switch
I
NSTALLING AND
WX S
WITCH
Before installing a WX switch, you might need to generate a network
plan with 3Com Wireless Switch Manager. (See "3Com Wireless Switch
Manager Network Plan" on page 25.)
The shipping carton for a WX switch contains the following items:
One WX switch, containing one power supply (except for the
WX2200, which has two power supplies)
For some countries, one country-specific power cord
One serial cable for connection to the management console (not
included with the WXR100)
Two rack-mount brackets (not applicable to the WXR100)
Four adhesive rubber feet
One documentation pack that includes this guide
One set of release notes
Figure 6 shows the contents of the shipping carton for a WX4400 switch.
The contents of a WX1200 and WX2200 shipping carton are similar. The
WXR100 carton contains the switch, a power supply and cord, rubber
feet, a documentation pack, and release notes.
C
ONNECTING A