NETGEAR RNDP6620-100NAS - ReadyNAS Pro RNDP6620 Business Edition Software Manual page 95

3. Select a backup destination.
This step is similar to Step 1 except you are now specifying the backup destination. If you
selected a remote backup source, you need to select a destination on the ReadyNAS.
The list of backup destination options is dependent on how your unit is configured. For
example, you must set up an iSCSI target on your unit before iSCSI appears on the
backup destination drop-down menu. Note that either the source or destination must be
the ReadyNAS.
If the source is the ReadyNAS, you can either enter a ReadyNAS destination or you can
specify a remote backup destination.
The remote backup destination can be a remote Windows PC with a ReadyNAS system,
a remote FTP site, a remote NFS server, a remote Rsync server, a ReadyNAS share, or a
USB device.
Note: You can select Rsync for a remote ReadyNAS if it is configured to
serve data over Rsync.
4. Set a backup schedule.
You can select a backup schedule as frequently as once every 4 hours, daily, or just once
a week. The backup schedule is offset by 5 minutes from the hour to allow you to
schedule snapshots on the hour (snapshots are almost instantaneous) and perform
backups of those snapshots.
ReadyNAS for Business RAIDiator 4.2.17
Backing Up Your Data
95